Hantek DSO5102P USB Digital Storage Oscilloscope 2 Channels 100MHz 1GSa/s for Pc Real-Time Analysis Record Length Up To 40K
About this deal
Compact and lightweight: the product weighs only 7.5 pounds hence easy to carry around. This makes it perfect for beginners and hobbyists. This model weighs 7.1 pounds or 3.2 kg. It’s quite bulky, requiring more space to fit. Display and Controls Then, we have the Hantek DSO5102P, which is a lot better for beginners. It’s not as convenient as the other model, but it’s easier to operate.
DSO 5102P | Hantek | Stationary Oscilloscopes | 5000P Series
This instrument has a 7-inch display with 800×480 pixels for the resolution. Both the brightness and the angle for viewing are incredible, similar to what you’d see in the more expensive oscilloscopes. So, it’s quite normal for them to be one of the user’s first options. However, despite that, there are some important factors that you should consider. Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditionstypes of auto measurements: the oscilloscope supports 32 kinds of auto measurements with a real-time statistic of minimum, maximum standard deviation. i don't think that they will every try. By design the DSO is using these few config files, as this is Linux these can be always changed. Auto set function: thanks to the auto set function, you can automatically detect square and sine waves.
Good Digital Oscilloscope for Beginners - Hantek DSO5102P Good Digital Oscilloscope for Beginners - Hantek DSO5102P
Record lengths usually vary, but you shouldn’t settle for anything less than 32 Kpts. Apart from that, two channels are enough for oscilloscopes, but some even offer 8 channels. Additional Features Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur.different types of waveform parameters: the device allows you to measure 32 different types of waveform parameters automatically. Besides, it will enable manual cursor functioning.
Owon SDS1102 vs Hantek DSO5102P Comparison - Science Selector Owon SDS1102 vs Hantek DSO5102P Comparison - Science Selector
When vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; It also helps a lot that the scope features every essential function you could expect. For instance, there’s the option to make either vertical or horizontal alignment, adjusting the scale, trigger, and many more. Hantek DSO5072P Digital Oscilloscope is one of the classic and popular brands in the Hantek Bench oscilloscope series.It provides a lot of menu information, and it’s easy-to-operate buttons allow you to gain more measurement data. Hantek DSO5102P Digital Oscilloscope has four math functions, including FFTs standard. It also has multiple automatic measurements and comes with software for analyzing PC real-time.